Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco MCU 5310 - Video ports in use - Peak usage

Hello, Is there anyway of obtaining via Syslog, SNMP, usage report or similar, on the peak port usage number of the video ports on the MCU and also having the 'Reset Max Values' automatically scheduled to be reset? Im wanting to obtain a peak video port usage on a weekly basis for capacity planning. Any ideas or help will be appreciated. Thanks in advance. Ray
Everyone's tags (2)
1 REPLY
VIP Purple

Hello Ray -Currently there is

Hello Ray -

Currently there is no possible method of getting the exact video ports in use.

This has been asked previously in the forums, and a quick search came up with the below discussion.  There is a post in there that says the MCU 5300 Series doesn't report the load of video/audio ports via API or other methods beyond using the MCU web interface or Conductor.

video-load-mcu-5310-through-xml-rpc

 

187
Views
0
Helpful
1
Replies