Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco TelePresence C-series API: Shutdown command

Hi All,

I'm looking for an API command that shutdown the codec. I've checked the C-series API TC4 and TC5 for the said command but I wasn't able to find it.

Has anyone knows the command to shutdown the codec?

Thanks!

Please rate replies and mark question as "answered" if applicable.
Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Cisco TelePresence C-series API: Shutdown command

Hi,

To shutdown device i found one command on TC5.1, not checked on TC4

xcommand Boot Action:Shutdown

You can try this command to shutdown device.

Regards,

Vivek

2 REPLIES
Bronze

Cisco TelePresence C-series API: Shutdown command

Hi,

To shutdown device i found one command on TC5.1, not checked on TC4

xcommand Boot Action:Shutdown

You can try this command to shutdown device.

Regards,

Vivek

Re: Cisco TelePresence C-series API: Shutdown command

If you have root access you could also try the "shutdown -h now" command, but for example my E20 still just reboots

(it also does not have a powerbutton or WOL so it might be hard to turn it on again :-)

So I could picture its also dependent on the endpoint, the EX series has at least a power button.

Vivek: as the release notes of TC5.1 state that this is a new api command I would not expect it not to work in older releases.:

http://www.cisco.com/en/US/docs/telepresence/endpoint/software/tc5/release_notes/tc_software_release_notes_tc5.pdf

Changed API commands

xCommand Boot

• Added: Action:

Please remember to rate helpful responses and identify

649
Views
0
Helpful
2
Replies
CreatePlease to create content