Can you please send me the Cisco equivalent/BoM for the polycom product below:
1 7200-26800-102 Polycom HDX Media Center 7000-720 2PT HDX 7200-23130-102,HDX Media Center Pedestal with 2-42"1080p LCD displays,2 Soundbars, EagleEye HD camera mount cable bundle, order casters separately(Maintenance Contract Required) qty==>2
2 2675-52709-001 Polycom caster kit for packaged solutions, Polycom HDX Media Centers only, single and dual displays. Set of 4, 2 locking for use in front ,4" qty==>2
3 2200-23809-002 Polycom HDX Ceiling Microphone- White "primary'; includes 2'(60cm) drop cable, electronics interface, wall plate with 10'(3m) & 50' (15m) plenum cable for HDX systems qty==>2
4 4870-00424-106 Polycom Premier, one year, HDX Media Center 7000 series with two displays qty==>2
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...