Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Telepresence ISDN Link with endpoint SX20

Hi,

I have two SX20 and one ISDN Link.

Knowing as ISDN Link manage calls for one endpoint, how can route call destined to Internet from endpoint connected to isdn link box ?

Is their any possibility to separate between isdn calls and IP Calls ?

Thanks and Regards

Driss

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

Cisco Telepresence ISDN Link with endpoint SX20

The ISDN Link can be connected to both the ISDN services and your LAN to make calls either over IP, or ISDN.  See the example of the C40 "Combining IP and ISDN" in the ISDN Link Data Sheet and the section on making calls in the Installation Guide.  These are also detailed in the Administrator Guide.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
1 REPLY
VIP Green

Cisco Telepresence ISDN Link with endpoint SX20

The ISDN Link can be connected to both the ISDN services and your LAN to make calls either over IP, or ISDN.  See the example of the C40 "Combining IP and ISDN" in the ISDN Link Data Sheet and the section on making calls in the Installation Guide.  These are also detailed in the Administrator Guide.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
671
Views
0
Helpful
1
Replies
CreatePlease login to create content