The weights and dimensions given in the document seem to be those of the assembled unit and do not include any packaging weight etc.
This is all to allow me to work out the logistics of getting what is a fairly large consigment to a third floor office location - I need to know if the whole unit will fit into the available lift at site, or whether it will be necessary to break the main package down into the key parts as they are packaged individually, in the hope that these may fit into the lift.
Is anybody able to offer this information, please?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...