09-10-2013 06:51 AM - edited 03-18-2019 01:46 AM
Hellu all,
Good eveing.
I want to undarstand the wurking and need of a telepresence cunductor and a border cuntroller.
i searched web and was not able to find a good understanding of it.
please help me undarstand those.
i thank you for reading
Dorte..
09-12-2013 04:49 PM
The conducor is not designed to work with a border controller.
It has to be used with CUCM or the VCS in combination with a Cisco Codian Style MCU or Telepresence Server
Check out these documents for example or browse a bit on the Cisco site or here in the forum:
http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/design/guides/videodg/videodg.pdf
Please remember to rate helpful responses and identify helpful or correct answers.
Please remember to rate helpful responses and identify
09-12-2013 06:17 PM
Hellu Martin.
surry for bad english.
i mean , i wanted to know their working and functionality
seperately.
I thank you for helping/
Dorte..
09-12-2013 07:40 PM
The TANDBERG BC does no longer exist, it and the old TANDBERG Gatekeeper, have both been replaced by the VCS; BC-->VCS-E and GK-->VCS-C.
In short, the BC is a h.323 only, firewall traversal server.
See this White Paper for more info:
The TANDBERG and H.323 White Paper might be of interest as well:
http://www.cisco.com/en/US/docs/telepresence/endpoint/mxp-series/white_papers/tandberg_h323.pdf
See the video data sheet for Conductor (and other documentation):
http://www.cisco.com/en/US/products/ps11775/index.html
/jens
Please rate replies and mark question(s) as "answered" if applicable.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: