Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Convert 7985 from SCCP to H323 or SIP?

Where can I find the documentation the describes how to convert a 7985 (T150) from a SCCP load to either an H.323 or (if available?) a SIP load so I can register it to my VCS-C/E instead of just CUCM.

Everyone's tags (4)
4 REPLIES

Convert 7985 from SCCP to H323 or SIP?

You would've been able to do that with just about any other TANDBERG system, but the 7985 (T150) doesn't fall into that category - unless things have changed now that TANDBERG is Cisco see:

http://vtctalk.com/forum/showpost.php?p=72254&postcount=9

/jens

Please rate replies and mark question(s) as "answered" if applicable.
Community Member

Re: Convert 7985 from SCCP to H323 or SIP?

How do I tell the difference?

This unit is Tandberg branded/badged, not Cisco.

Am I in luck?

Sent from Cisco Technical Support iPad App

Re: Convert 7985 from SCCP to H323 or SIP?

Don't know - guess best bet would be to either contact your Cisco rep or open a case with TAC and see if you can get a key for it.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Re: Convert 7985 from SCCP to H323 or SIP?

Not sure if it works for the 150mxp, but maybe this document helps you:

How to convert a MXP 1000 with SCCP M2.x Firmware to a MXP 1000 with F9.X Firmware:

https://supportforums.cisco.com/docs/DOC-24414.pdf

Anyhow it would require a valid license key like Jens mentioned.

It might be better then nothing in a lab enviroment, but to be honest, do you really want to use it?

JabberVideo will give you a better quality.

Getting some E20 as long as they are available might be a good idea as well :-)

Please remember to rate helpful responses and identify

1395
Views
0
Helpful
4
Replies
CreatePlease to create content