Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Could you advice to me about SX20 log messages ?

Hi everyone

 

Recently, SX20 has interoperated  with 3rd SIP server & MCU

register & Connection was done , But it has a problem about video quality

The symptom is that Video packet loss has continued generated from MCU to SX20 (Network status is fine , Several times check )

At that time SX20 generated log messages as below:

Jan  1 11:06:19 a8 vcodec: GDR_handleDecoderResult: GDR received
Jan  1 11:06:21 a8 vcodec: GDR_handleDecoderResult: GDR received
Jan  1 11:06:23 a8 vcodec: 626.09 DEC_FSM-0 I: intra request
Jan  1 11:06:23 a8 vcodec: GDR_handleDecoderResult: GDR failed, frame status = 2000200
Jan  1 11:06:23 a8 vcodec: 626.10 DEC_FSM-0 I: Decode Err: 0x02000a00|Concealment Applied|Missing slice|
Jan  1 11:06:23 a8 vcodec: 626.20 DEC_FSM-0 I: Decode Err: 0x02000a00|Concealment Applied|Missing slice|
Jan  1 11:06:23 a8 vcodec: 626.62 DEC_FSM-0 I: intra request
Jan  1 11:06:23 a8 vcodec: 626.72 DEC_FSM-0 I: Decode Err: 0x02000a00|Concealment Applied|Missing slice|
Jan  1 11:06:24 a8 vcodec: 627.14 DEC_FSM-0 I: intra request
Jan  1 11:06:24 a8 vcodec: 627.74 DEC_FSM-0 I: intra request
Jan  1 11:06:24 a8 vcodec: 627.75 DEC_FSM-0 I: Decode Err: 0x02000a00|Concealment Applied|Missing slice|
Jan  1 11:06:28 a8 vcodec: GDR_handleDecoderResult: GDR received
Jan  1 11:06:30 a8 vcodec: GDR_handleDecoderResult: GDR received

 

Does anyone explain to me log messages mean. ?

(please refer to attached file. SX20 version is TC 6.1.1)

3 REPLIES
VIP Green

Firstly, I'd recommend that

Firstly, I'd recommend that you upgrade the software version on your SX20 as TC6.1.1 is vulnerable to the Heartbleed OpenSSL Security Vulnerability (you need TC6.3.1 or TC7.1.1 to be safe).

With regard to your error - what bandwidth are you making the call at?  Does the video quality improve (and get less errors) if you lower the bandwidth?

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
New Member

Thanks Wayne for response we

Thanks Wayne for response 

we got a test as follow conditions

 

The call rate is over 1Mbps. 

Resolution is HD(720p)

 

BR

JH Lee

VIP Green

Try at a lower call rate and

Try at a lower call rate and see if you still experience issues (eg 512k). It could be that your network link isn't quite up to scratch to take a full rate call. But confirming that a lower speed call will work will help narrow down where the problem is (endpoints or network).
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
222
Views
0
Helpful
3
Replies