Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

CTMS 1.8 , CTS Manager 1.8 , CUCM 8.6.2

Hi to all

we have some issues with the CTMS , CTM, CUCM

1) We have added succesfully the publisher CUCM in to CTM.What about the subscriber CUCM.The user and pass it supposed to be the same that we used for  the Publisher from the application user that we have created for the CTS Manager.What about the certificate.We have to use the cerificate from the publisher or the certificate from the Subscriber to add the subscriber CUCM in to CTS Manager

2) We tried to register CTMS with CTS Manager without any success

we use in CTMS in the field CTS Manager : user =admin username for the CTS Manager, pass=admin  password for the CTS Manager.Actually we used the admin credentials for the CTS Manager.

Are these credentials the correct or is something else?

Regards

chrysostomos

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CTMS 1.8 , CTS Manager 1.8 , CUCM 8.6.2

Chrysostomos,

The CTM is designed to talk to only one CUCM per cluster and supports up to 5 clusters. The cluters can be a mix of secure and non-secure but must use SIP trunks as inter-cluster trunks. When building the CTMS in the CTM and vice versa use the same username and password on both sides if not then the CTMS wion't register with the CTM.

V/R,

JD King

2 REPLIES
Cisco Employee

CTMS 1.8 , CTS Manager 1.8 , CUCM 8.6.2

Chrysostomos,

The CTM is designed to talk to only one CUCM per cluster and supports up to 5 clusters. The cluters can be a mix of secure and non-secure but must use SIP trunks as inter-cluster trunks. When building the CTMS in the CTM and vice versa use the same username and password on both sides if not then the CTMS wion't register with the CTM.

V/R,

JD King

Re: CTMS 1.8 , CTS Manager 1.8 , CUCM 8.6.2

HI

Very simple and useful answer

Thank you a lot

Another one question and finish

What i have to do to establish a secure connection between those two devices.Because now is register as a non secure

Regards

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
460
Views
0
Helpful
2
Replies
CreatePlease to create content