Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CTS 1300 compatibility to C-20 based endpoint system

Can you tell me if a CTS 1300 system can point to point conference a C-20 endpoint or register to a Codian MCU(4501) or does it require CUCM, VCS server etc to allow this?

Thanks

  • TelePresence
1 REPLY
Bronze

Re: CTS 1300 compatibility to C-20 based endpoint system

Hi

To make a Point-to-point call you can register both CTS-1300 and C-20 (needs TC5 software, currently release pending)  diectly to CUCM 8.6.2 (you can natively register C-20, c-40 etc) and will be able to make calls.

or

you can register CTS-1300 to CUCM and C-20 to VCS and then can create a SIP trunk between them to make calls.

Please let us know if you need any further info.

HTH

Arun

if helpful, pls rate.

533
Views
0
Helpful
1
Replies
This widget could not be displayed.