Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CTS-PHD1080P12XS2=

Hi     

                 

Question  about CTS-PHD1080P12XS2= (PrecisionHD Camera 1080p 12x Gen 2).

Do I understand correctly?

This camera only for SX20?

If i need second camera for C60 i must order CTS-PHD-1080P-KIT=

Gen 2 - that means? where can I read?

thanks

br Oleksandr

br Oleksandr
Everyone's tags (1)
15 REPLIES
VIP Purple

CTS-PHD1080P12XS2=

The CTS-PHD-1080P-KIT= are the for the C-Series that contains all the necessary cables for the camera.  If all your looking for is a spare camera with no cables, than CTS-PHD-1080P12XS= is what you want.

A replacement camera for the SX20 would be CTS-SX20-PHD12X-K9.

I did a search on that Gen 2 camera, but wasn't able to find a description for it, saying what exactly it is in relation to the other cameras and products.

CTS-PHD1080P12XS2=

Hi Patrick

Do not agree with you  ... CTS-SX20-PHD12X-K9 its not only camera, its full complete SX20

br Oleksandr

br Oleksandr
VIP Purple

CTS-PHD1080P12XS2=

Hm.. it looks like you are correct, I didn't notice on the SX20 data sheet that the part numbers listed were the actual system including cameras.  I'd figure they'd have the base system and then selecable camera options (seperate part numbers)?

VIP Purple

CTS-PHD1080P12XS2=

Oleksandr - According to the PrecisionHD user guide, the CTS-SX20-PHD12XS2 is for the SX20.  Generation 2 must refer to the new type of camera connector used in the SX20 series, a combined video and control cable.

http://www.cisco.com/en/US/docs/telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.pdf

CTS-PHD1080P12XS2=

Thanks, Patrick

TANDBERG and Cisco earlier has published a very useful document

"Components and Cables for Cisco TelePresence Endpoints"

But now new version of this document is absent :-((

br Oleksandr

br Oleksandr
VIP Purple

CTS-PHD1080P12XS2=

I remember that document, no telling where an updated on is though??

If you got the answer you wanted, don't forget to mark the post.  Thanks,

New Member

CTS-PHD1080P12XS2=

Hi,

  The 1080P12XS2= camera are new generation camera which resolved the issue faced for HD-SDI port on camera.

Earlier CTS-PHD1080PXS1= camera had some HD-SDI port issues due to which video sent out from HD-SDI port see drops.

Hope this helps.

Thanks,

Amlesh

New Member

CTS-PHD1080P12XS2=

Hi,

I need to order a camera for C40, which one should I order CTS-PHD-1080P12XS= or CTS-PHD1080P12XS2=

Regards,

Aastha

CTS-PHD1080P12XS2=

Hi Aastha

I recommend to order CTS-PHD-1080P-KIT=

This kit is include: camera, power supply, cables

br Oleksandr

br Oleksandr
New Member

CTS-PHD1080P12XS2=

Hi Oleksandr,

Thanks for quick reply. The problem is we have ordered CTS-C40-K9 instead of CTS-INTP-C40-K9. Now we need to order Mic and Camera seperately. We are ordering below mentioned part code:-

CTS-PHD-1080P12XS=

CTS-MIC-OMNIDIR=

CAB-VC-5M=

CAB-2HDMI-5M=

CAB-VGA-DVI-AUD=

PSU-CAM-V=

Do you suggest that we should order CTS-PHD-1080P-KIT= instead of CTS-PHD-1080P12XS=

Regards,

Aastha

Cisco Employee

CTS-PHD1080P12XS2=

Hi All.

Just to give you a specific list on what the -kit includes:

CTS-PHD-1080P-KIT=

PrecisionHD 1080p 12X Camera Kit

Main Components

CTS-PHD-1080P12XS=

included

Cisco TelePresence PrecisionHD Camera 1080p 12x

CAB-VC-5M=

included

Visca-Cable-DSUB9-RJ45-5m

CAB-VCDC-6.5M=

included

PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m

CAB-2HDMI-5M=

included

HDMI to HDMI Cable 5m

ADPT-HDMI-DVID=

included

Adaptor HDMI To DVID

PSU-CAM-V=

included

Power Supply PHD Camera/MXP/Wave II -

12VDC/36watts

If you have the camera, and only need cables and so on then go for

ACC-PHD1080P=

Accessories Kit for PrecisionHD Camera

Main Components

CAB-VC-5M=

included

Visca-Cable-DSUB9-RJ45-5m

CAB-VCDC-6.5M=

included

PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m

CAB-2HDMI-5M=

included

HDMI 5m

ADPT-HDMI-DVID=

included

HDMI - DVI-D adapter

PSU-CAM-V=

included

Power Supply PHD Camera/MXP/Wave II -

12VDC/36watts

Thanks


//Marius

New Member

CTS-PHD1080P12XS2=

Hi Marius,

We have to order Camera too. But I don't think so that we will need ADPT-HDMI-DVID= and CAB-VCDC-6.5M=. We actually forgot to order Camera with C40 unit. So we were ordering:-

CTS-PHD-1080P12XS=

CAB-VC-5M=

CAB-2HDMI-5M=

PSU-CAM-V=

Please correct me if we are ordering wrong.

Regard,

Aastha

New Member

CTS-PHD1080P12XS2=

It seems extablished that to order a second camera its best to order CTS-PHD-1080P-KIT=

The previous posts suggest that CTS-PHD1080P12XS2= is for the SX20.

What makes this very confusing is that on CCW for the C60 integrator bundles the included camera SKU and description is :

CTS-PHD1080P12XS2

PrecisionHD Camera 1080p 12x Gen 2

On the C40 Integrator bundle the x12 camera SKU is :

CTS-PHD1080P12XS2

PrecisionHD Camera 1080p 12x Gen 2

So they both look like they are referring to the CTS-PHD1080P12XS2=

Can anyone shed light on this?


New Member

CTS-PHD1080P12XS2=

Is the SKU available on the C40 actually suppose to be

CTS-PHD-1080P12XS

Silver

CTS-PHD1080P12XS2=

Hi Ray,

seems like there are 2 -3 discussions going on currently on the

CTS-PHD1080P12XS2

  topic.

related to your questions

Is the SKU available on the C40 actually suppose to be

CTS-PHD-1080P12XS?   yes

The previous posts suggest that CTS-PHD1080P12XS2= is for the SX20.  NO

its the same 12x camera released for one HDSDI issue resolution fo rspecific users as they use the HDSDI port.

Regards

Ravi Kr.

7080
Views
3
Helpful
15
Replies