Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Difference Between 1.9.2 and TX Software

Hi Experts,

Could you please let me know the pros and cons of using TX software on newly installed TX9000. Currently, I am running CTS 1.9.2 and we don't get the screen capture from TX9000 GUI . Cisco recommended us to use TX6.0 for TX devices.

I am little confused because majority of my devices are running CTS 1.9.2  and we have just bought couple of TX series devices.

So I just want to figure out the pros and cons before upgarding these TX Series devices to the TX softwar version.

Please let me know your opinions.

Thanks,

Saurabh Gupta

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Difference Between 1.9.2 and TX Software

Saurabh,

The TX Software are for the Lago Codecs. The software still gets downloaded as CTS firmware in COP file format. One the primary codec downloads the firmware from the CUCM you will see the TX tag. I will provide a link to get to the TX features guide.

http://www.cisco.com/en/US/docs/telepresence/tx_sw/6_0/admin/guide/tx_sw_features.html

Hopefully this helps out.

JD King

1 REPLY
Cisco Employee

Difference Between 1.9.2 and TX Software

Saurabh,

The TX Software are for the Lago Codecs. The software still gets downloaded as CTS firmware in COP file format. One the primary codec downloads the firmware from the CUCM you will see the TX tag. I will provide a link to get to the TX features guide.

http://www.cisco.com/en/US/docs/telepresence/tx_sw/6_0/admin/guide/tx_sw_features.html

Hopefully this helps out.

JD King

281
Views
0
Helpful
1
Replies