Our network setup is we have VCSc&e, Conductor, TIP 7010--2Nos,TMS,& ISDN GW.
TIP servers are managed by conductor, VCSc & Conductor is connected on Call policy services. All the equipment’s are added in TMS.
We are using 48XXXX number series used for meetings and we create a search rule in VCSc (48.*) and pointing to conductor policy
We created a meeting on TMS and meeting number is 481234 and same meeting ID we try from endpoints it got connected.
Current problem is somebody trying from EP to 485678 (this meeting ID is not created on TMS) the conductor automatically create a one meeting on TIP server and connect the call or Connect the call to 481234 meeting.
Our requirement is only meeting must be created on TMS. If somebody try’s from EP to irrelevant meeting ID calls needs to be block.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...