Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Do we need to restart any services after adding a Static Route on VCE


I am planning to add the below static route on VCE, can you please let me know if we need to restart any services after adding the static route.

xCommand RouteAdd Address: X.X.X.X PrefixLength: 32 Gateway: X.X.X.X
Interface: LAN1

-Sandesh Rao

New Member

hi , You need to make a

hi , You need to make a restart.



New Member

Hi Alex,Thanks for your reply

Hi Alex,

Thanks for your reply.

I was going through the Static routes section on Cisco TelePresenceVideo Communication Server Basic Configuration(Control with Expressway) Deployment Guide Pages 65-66. There was no mention on VCE restart.

Please let me know if there is any cisco document relating to this.



New Member

Hi, true in the administrator

Hi, true in the administrator guide does not appear.

however, to apply the route appears as alarm, indicating that it is necessary to do a restart to apply the changes. 

that in 8.1.1

that's my story. 
a greeting

CreatePlease to create content