03-19-2014 11:32 PM - edited 03-18-2019 02:45 AM
Hi all,
I have a CTS C60 codec which has to be installed in a new site which has vpn connectivity to the HQ. The HQ is fully functional with a BE 6k, C60 codec, etc.
Do I require a BE 6K in the new site for the installation of c60 codec. (I am confused because I heard that it requires BE 6k sometimes)
Thanks in advance
Solved! Go to Solution.
03-20-2014 05:34 AM
Yes. You can make inter-site calls, then register your C60 on BE6K from HQ.
For registration BE6K must have one TP room license for your C60.
Recomended bandwidth is > 1Mb.
Find and read : Cisco TelePresence Administering TC Endpoints on CUCM
br Oleksandr
03-20-2014 04:30 AM
Hi
Where would you like to call from your C60.
You do not need a second BE600.
br Oleksandr
03-20-2014 05:12 AM
I want to make inter-site calls. is it possible with this setup?
03-20-2014 05:34 AM
Yes. You can make inter-site calls, then register your C60 on BE6K from HQ.
For registration BE6K must have one TP room license for your C60.
Recomended bandwidth is > 1Mb.
Find and read : Cisco TelePresence Administering TC Endpoints on CUCM
br Oleksandr
03-20-2014 05:51 AM
Do I need any other licenses for this installation?
03-20-2014 06:18 AM
No. Only one TP Room License for BE6K (BE6K-UCL-TP-RM).
br Oleksandr
03-20-2014 05:15 AM
what is the bandwidth requirement for intersite calls? (I couldn't find it in the datasheet)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: