Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does resolution still drop on a multisite call if a Premium License is active?

Hello,

On multipurpose codecs, the resolution will drop when a multisite call is established using the onboard multisite bridging feature.  Resolution drops as follows for the below endpoints:

SX20 resolution changes to 576p30

C40 resolution changes to 576p30

C60 resolution changes to 720p30

C90 resolution changes to 1080p30

If one applies a Premium Resolution licenses to the codec, does the resolution still drop?  stay the same?  or at least get bumped up slightly higher? 

If it does increase the resolution, how much does it increase for each model?

Everyone's tags (4)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Does resolution still drop on a multisite call if a Premium

Hi Kris,

It will still drop, regardless of PR-key.

Thanks

//Marius

Cisco Employee

Re: Does resolution still drop on a multisite call if a Premium

Hi Kris,

Yes, the resolution will still drop in case there are any packet loss in the network or the bandwidth is not available.

In the case of less bandwidth available, the call would downspeed and the resolution and call quality would drop.

4 REPLIES
Silver

Re: Does resolution still drop on a multisite call if a Premium

Hi Kris,

Premium resolution key provide below resolutions:

  • 1920 × 1080@60 fps (1080p60)*
  • 1920 × 1080@30 fps (1080p30)
  • 1440 × 900@30 fps (WXGA+)
  • 1472 × 1080@30 fps (SXGA+)
  • 1680 × 1050@30 fps (WSXGA+)
  • 1600 × 1200@30 fps (UXGA)
  • 512 × 288@60 fps (w288p60)
  • 768 × 448@60 fps (w448p60)
  • 1024 × 576@60 fps (w576p60)
  • 1280 × 720@60 fps (720p60)
    • 1080p60 is only supported by SX20, MX300-G2, C60 and C90

below table explain the call rate and resolution with 30 and 60fps ( for single call).

resolution table.jpg

Cisco Employee

Re: Does resolution still drop on a multisite call if a Premium

Hi Kris,

It will still drop, regardless of PR-key.

Thanks

//Marius

Cisco Employee

Re: Does resolution still drop on a multisite call if a Premium

Hi Kris,

Yes, the resolution will still drop in case there are any packet loss in the network or the bandwidth is not available.

In the case of less bandwidth available, the call would downspeed and the resolution and call quality would drop.

Cisco Employee

Re: Does resolution still drop on a multisite call if a Premium

Dear Nikita/Amit,

Please read the questions asked before you answer.

//Marius

358
Views
0
Helpful
4
Replies
CreatePlease login to create content