We have a VCS with X6.1 with Profile and EX Series registered, when i tried to regsiter a new one iam getting registration failed and in the VCS logs i could see status rejected for both H323 and SIP. Reason: "Not permitted by Policy".
The existing endpoints which were registered before are still registered with H323 but not SIP.
Iam attaching the error log snap.
There is no configuration made on Registration Policy.
I've had a similar issue in the past where SIP registrations were rejected, turned out it was caused by h.323 id and SIP address being identical, i.e.with both h323 id and SIP using b1102, the SIP registration would be rejected.
Changing h323 id slightly to b1-102 fixed it. Might not be the cause of your issue, but I thought I'd mention it just in case.
Please rate replies and mark question(s) as "answered" if applicable.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...