EX90 and MX Series Ports

[bobby.jacob]

Helloo,

We have 3 endpoints to be installed, one in HQ and other 2 in sites, we have to call one to one using IP's and also Multi site conference.

What are the ports to be opened?

Tnx

Bobby

[Martin Koch]

If you ask questions tell us a bit more about your deployment, like version numbers used,

call protocoll used, if any call control is present, .... the more info the better.

Also please search in the forum and/or with google first!

For H.323 direct calls the used ports are:

• Q.931 call Setup: Port 1720 (TCP)
• H.245(Static): Port Range 5555-6555 (TCP)
• H.245(Dynamic): Port Range 11000-20999 (TCP)
• Video*: Port Range 2326-2485 (UDP)
• Audio*: Port Range 2326-2485 (UDP)
• Data/FECC*: Port Range 2326-2485 (UDP)

         *Configurable by "RTP Ports Range Start" and "RTP Ports Range Stop"

Please remember to rate helpful responses and identify helpful or correct answers.

[bobby.jacob]

Hello martin,

There will be 3 endpoints in the site, no VCSc or CUCM. As i mentioned earlier dial endpoints using IP addrs.

Tnx,