Unfortunately the product key issue is still open.
Maybe it is similar to the NPP, like it's already there, and it doesn't show as an installed key? What do you think?
The product key doesn't need to be entered for an EX90. The product key is used to tell a system it is a particular type of system. For instance, if a codec were part of an integrated system like the older profile systems, the product key was used to make the codec report itself as a 'Profile 52' instead of just a regular C90 integrator codec, etc.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...