Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Faulty C90 Ethernet Port?

Dear Members,

I have a Cisco C90 which used to work flawlessly, It is running on TC4.2.3 firmware.

1. One sudden day the ethernet port start to fail. The ethernet cable is connected from Codec's ethernet port 1 to our wall ethernet port point. It shows "no LAN" and we are unable to communicate with the codec via IP.

2. However, if I connect my laptop directly to the codec's ethernet port, I am able to establish a successful connection.

3. Or if I connect the codec to a normal home router, I am able to communicate with the codec too.

4. I have performed xcom factoryreset.

The wall ethernet port point is 100% working because currently I deployed another C90 loaded with the exact config.db file without any problem.

Do I need to RMA this unit?

1 REPLY
VIP Green

Faulty C90 Ethernet Port?

My guess would be, given that the device works when connected to your laptop, and elsewhere, that the problem was more likely a cable issue in it's original location - either not being plugged in correctly, or a fauty network lead / patch at the other end of wherever the telecommunications outlet on your wall connects back to (or a speed/duplex/port security issue with the switch).

If the unit is now working correclty, I wouldn't think it would be eligible for an RMA...

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
216
Views
0
Helpful
1
Replies