Getting the video port allocation status out of Conductor or conferencing bridges
Is there a nice and easy way to get the total video port allocation information from Conductor or MCU units to be used in a portal or in a similar service? Also, what is the best way to get warnings/alerts about the video port allocation exceeding its limits without polling Conductor/MCUs?
Getting the video port allocation status out of Conductor or con
Unfortunately there is no automate warning/alerts notification mechanism for video port utilization level.
Under Status > Conferences on MCU Web GUI, you may able to review current and max utilization level for video and audio ports.
TelePresence Conductor manage MCU resource information but doesn’t support API with current release version therefore limited solution for automate notification.
You may retrieve connect/disconnect log and build up DB but depend on media port configuration, you may need to add additional port for content/streaming also video port(s) for cascading if TelePresence Conductor is used with cascade configuration template.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...