5 points for Oleksandr, as its at least an option to solve "I want to see a multicast stream" and would give you the
capability to further debug.
In general it can fail on multiple places, your switches/routers have to be properly set up to support multicast.
As you write that you see multicast packets (without even joining) it sounds that you have a pretty basic
For VLC I would just try to enter as the network URI: (either one of these)
Interesting that the IPVCR seems to share the same multicast ip for different bandwidth of video and has the audio on an other ip. So I would assume you do not get audio with that, but it shall be possible to open both at the same time.
Btw, I would not use 220.127.116.11/24 as this is reserved as the local network control block. (.51 is reserved for zeroconf).
Maybe using something in 18.104.22.168/16 makes more sense.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...