we have VCS server with MCU 5301.There used to be 12 participants earlier in one conference but now only 10 participants can be in a conference I mean I can not call 11th participant. If I need to accommodate the new one, one of the participant need to removed from conference. I want to make 12 or more participants in one conference.Where to do these settings?
It depends on your media port settings on the MCU, of how many participants can join and the number of media ports get consumed by each participant.
I don't have an 5300 series MCU, but I believe the user interface is the same as the 8510, so my instructions should be close as to where to check.
To see details of ho many participants vs video ports you have, check Settings > Conferences > Video ports in use. Should appear as 3 sets of numbers, that will tell you how many participants you currently have connected, the last known maximum the MCU has reached since last restart/reset, and the max the MCU can have total.
What is the current configuration of the media ports mode under Settings > Media Ports?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...