06-08-2018 11:24 PM - edited 03-18-2019 02:10 PM
Hi,
I have a question:
We are using "xCommand Provisioning Service Fetch" for mass provisioning of Macros and In-Room Controls. This works as expected.
Now we have the need for removing some of the previously provisioned Macros and In-Room Controls. Is there a way to "Uninstall" a previous bundle or to remove Controls and Macros separately?
Thanks
Renz
Solved! Go to Solution.
06-09-2018 01:16 PM
Hi, you are provisioning the macros using a bundle, this is a backup restore procedure. To remove the individual macros you need to issue an xCommand on each codec. This can be provisioned via TMS (not UCM) as a custom command or you can script it (using the SSH xAPI or XMLAPI. You cannot provision custom commands using the backup and restore mechanism.
The command you should use is:
xCommand Macros Macro Remove Name: nameofmacro
I do have a script to send custom commands via the XMLAPI using a CSV file of codecs, let me know if you need it. If you have your own solution thats fine as well. :)
/Magnus
06-09-2018 01:16 PM
Hi, you are provisioning the macros using a bundle, this is a backup restore procedure. To remove the individual macros you need to issue an xCommand on each codec. This can be provisioned via TMS (not UCM) as a custom command or you can script it (using the SSH xAPI or XMLAPI. You cannot provision custom commands using the backup and restore mechanism.
The command you should use is:
xCommand Macros Macro Remove Name: nameofmacro
I do have a script to send custom commands via the XMLAPI using a CSV file of codecs, let me know if you need it. If you have your own solution thats fine as well. :)
/Magnus
06-10-2018 11:17 PM
Hi Magnus,
thanks. I think this would work here as well. Can you send me the script you mentioned, please?
Renz
04-02-2019 07:06 AM
06-19-2019 07:02 AM
I am very interested in using "xCommand Provisioning Service Fetch" for mass provisioning of Macros and In-Room Controls. Could you share me how to do it?
I use the command to update the provision, but it failed
xCommand Provisioning Service Fetch Checksum:"7b6a91e2fd68729dafc06450ddab032ff9a6eec1b4aac9828a2d1bde9af309f4f5dac11965bf90636f7958a042e78d27ac95f49ac935f8b240dd0692fb45906c" ChecksumType:SHA512 Mode:Replace Origin:Other URL:"http://bbtms.1table.cn/tms/public/external/management/systemmanagementservice.asmx"
OK
*r ServiceFetchResult (status=Error):
*r ServiceFetchResult Reason: "Checksum mismatch"
** end
09-10-2019 05:00 AM
The file you should be pointing to should be the backup.zip file created when you created a backup from the web page of the system, and not the tms provisioning file.
04-27-2021 01:05 PM
Hello All,
Has anyone figured out how to remove In Room Controls in bulk?
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: