Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Installing a Cisco SX-20 in Germany

I have installed a number of C-40s and SX-20s in the US over the past 2 years. I have to install a SX-20 in Germany, is there any differences i have to be aware of when installing a SX-20 in Germany?

Everyone's tags (1)
2 REPLIES
VIP Purple

Apart from a different power

Apart from a different power cord, and voltage, it should be pretty well exactly the same.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

If the system is ordered for

If the system is ordered for Germany it should work fine power wise.

At least the power supplies I had seen in Europe were something like 100-250v so should

work out of the box (Germany uses 230v) as long as you have the right cord, but these are standard cables so

its not hard to get hold on.

 

The only additional thing might be if you encounter issues with florescent light, there is a

parameter, its 60hz in the us and 50 hz in most of Europe, incl Germany

 

Cameras PowerLine Frequency

Applies to cameras supporting PowerLine frequency anti-flickering, i.e. Precision 1080p cameras.

Requires user role: ADMIN

Value space: <50Hz/60Hz> 50Hz: Set to 50 Hz. 60Hz: Set to 60 Hz.

Example: Cameras PowerLine Frequency: 50Hz

Please remember to rate helpful responses and identify

67
Views
0
Helpful
2
Replies
CreatePlease to create content