The integration of TMS with AD does not work, the connection with AD with the connection test works but when the first user login with their AD accounts, TMS does not receive the information automatically sent as Email , phone number, I get only the name and it is more about the firstname fields.
I can sign in with the user of the AD, I have the "update from active directory" button, when I run it, execute it well without error, but the information is not modified .
The network setting is configured with the AD information (user information lookup yes, GC server, domain and user paswword AD), the AD account used for synchronization already works with Call Manager and it is receiving any information.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...