Could you give us some more information about your situation/scenario? The reason I ask is that you have posted this requested on the TelePresence forums so I'm trying to understand if you are using the IP Phone somehow related to TelePresence. With the legacy CTS systems you can use the IP Phone for Control of the system. If that is the case then you can reference this configuration guide below:
If you're referring to how you should configure an IP Phone and/or Call Manager we can get you pointed into the directions of Call Manager deployment guides but it will help to know which version of Call Manager you are using.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...