Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ISDN 3241 Gateway Calling Party Number

Hi all,

we struggeling a bit in order to config an isdn gateway 3241 behind a pbx from alcatel omni pcx enterprise.

Basicly is all working, but the calling party number is not completed.

Is there a way to set the byte 3 in isdn to "national" or "private" ?       

In addition to that, could someone explain the "national bits sa4...sa8" ? which isdn bit could be changed with that ?

Many thanks

/dirk

1 REPLY

ISDN 3241 Gateway Calling Party Number

If you do not get a better answer (eg. by Cristian) and you have a service contract, think of opening

a service request and ask for configuration help.

Did you check on the options you find at the Settings ISDN page?

Could picture that the private flag is set untill you set "Specify national/international type of number".

Maybe its also related to  Send "sending complete" or Legacy capabilities.

If you have a pbx admin available I would play around with these options and let him check

what might work. Anyhow, there also might be the way to configure the PBX to make it work.

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify

288
Views
0
Helpful
1
Replies
CreatePlease to create content