Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN Gateway 8321 - VCS

Hello,

I have a customer who has installed the ISDN GW 8321. They are attempting to register to their VCS Control via H.323. It will not register. When they review the VCS logs, they can see the ISDN GW has attempted to register, but it reports that the registration is expired. Other blades and endpoints register successfully. I've reviewed the admin guide for the VCS and can't find reference to this state and how to correct. Any advice appreciated.

Thanks.

Sent from Cisco Technical Support iPhone App

  • TelePresence
2 REPLIES
Cisco Employee

Re:ISDN Gateway 8321 - VCS

What does the H323 Log say from the ISDN GW? Can you run both at the same time and compare?

In the end packet trace may be required from both ends to see whats up.

VR
Patrick


Sent from Cisco Technical Support Android App

VIP Green

ISDN Gateway 8321 - VCS

Might be a silly question - but is the time set correctly on the devices?  Are they both set to the same ntp server, and able to get the correct time from this server?  If the time stamps on the two devices are significantly different you can get some wierd behaviour.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

233
Views
0
Helpful
2
Replies