Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Jabber ipad for Telepresence Far End Camera Control for MCU Auto Attedant

Hi All,

it is possible to set over the ipad, if we join to the Auto Attendant on the MCU to serverval conference rooms. How i can move  the arrow on the Auto Attendant on the with the iPad?

is that possible?

THX

  • TelePresence
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Jabber ipad for Telepresence Far End Camera Control for MCU Auto

Hi,

You could activate DTMF navigation by pressing twice # on DTMF window.

Then you could use 8, 2, 4 and 6 keys ( for up, down, left and right ) for menu navigation.

Hope that help !

Valentin

10 REPLIES

Re: Jabber ipad for Telepresence Far End Camera Control for MCU

Hi,

Yes, Jabber for IPad does support FECC, but it is not enable by default, you will have to enable FECC in provisioning directory configuration in TMS. Configure your provisioning template and set the parameter "Far end camera control" to On.

I hope this help.

Regards

Paulo Souza

Please rate replies and mark question as "answered" if applicable.

Paulo Souza Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".
New Member

Re: Jabber ipad for Telepresence Far End Camera Control for MCU

Hi ,

I enabled the feature in the template , but it did not help. How I can use the far end camera control on the iPad . It is not possible

Sent from Cisco Technical Support iPhone App

Re: Jabber ipad for Telepresence Far End Camera Control for MCU

Hi,

To update the settings, you must to reprovision the client, just logout and login again. Have you done that?

Regards

Paulo Souza

Please rate replies and mark question as "answered" if applicable.

Paulo Souza Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".

Re: Jabber ipad for Telepresence Far End Camera Control for MCU

We do not see an icon on the iPad for far end camera control or up/down/left/right arrows.  When/if enabled properly in the TMS, what do you TAP on the iPad screen to invoke the FECC?  We've downloaded the latest, 9.4.3 Cisco Jabber for iPad.

Jabber ipad for Telepresence Far End Camera Control for MCU Auto

I just had a look at our work iPad2 and there is no FECC option available neither in enterprise version nor "free" version. (Enterprise version is being provisioned with FECC "On".)

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.
New Member

Jabber ipad for Telepresence Far End Camera Control for MCU Auto

Hi,

You could activate DTMF navigation by pressing twice # on DTMF window.

Then you could use 8, 2, 4 and 6 keys ( for up, down, left and right ) for menu navigation.

Hope that help !

Valentin

New Member

Jabber ipad for Telepresence Far End Camera Control for MCU Auto

Perfect. It works :-)

New Member

Jabber ipad for Telepresence Far End Camera Control for MCU Auto

I'm glad I could help you !

Re: Jabber ipad for Telepresence Far End Camera Control for MCU

Works nicely for navigating a MCU menu, which was the original question, so +5 for that , but it ain't FECC - and it would be nice to have FECC in point-to-point calls. /shrug

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.
1036
Views
5
Helpful
10
Replies