08-13-2012 08:27 AM - edited 03-17-2019 11:36 PM
Hi All,
I'm having this strange problem.
I've configured TMS for extended provisioning, but I just noticed something very strange.
When I log in as any user, when I put any password in there I can successfully log in as the user.
I tried off the wall passwords on multiple users, and they continue to succesfully log in regardless of password!!
Anyone have any ideas on why this would be?
These users were manually added.
thanks
Paul
Solved! Go to Solution.
08-13-2012 08:34 AM
I've had the same results as well, I found it to be the that the Default Zone was set to "Treat as Authenticated". it should either be "Do not check credentials" or "Check credentials".
Sent from Cisco Technical Support iPad App
08-13-2012 08:34 AM
I've had the same results as well, I found it to be the that the Default Zone was set to "Treat as Authenticated". it should either be "Do not check credentials" or "Check credentials".
Sent from Cisco Technical Support iPad App
08-13-2012 11:45 AM
Paul,
Also make sure that in TMS under the TMS Agent tab for the VCS that the 'Authentication Scheme' is set to 'Digest' and not 'None'.
Thanks,
Justin
08-13-2012 03:12 PM
Take a look at the "Authentication of devices and accounts" section found here:
and choose the document which corresponds to software version of your VCS.
/jens
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: