Laptop/PC presentation from C20 to Sony PCS-1 causes Video to fr
Cisco/Tandberg Endpoints are not fully interoperable with all Vendors and thier are certain limitations to some extent. The case which you are talking here is one of them but before going ahead with any conclusion.
You need to narrow things down by performing troubleshooting .
Here are some steps which you can check :-
1.) You can bypass all infrastructure devices in between and then try Presentation Sharing again.
2. ) As clearly Stated in Mubashshir's post, this issue is in TC 5, then please downgrade your endpoint to TC 4 and check again.
3. ) Try to collect logs from both the endpoints which are working and which are not working and then try to compare and check where the problem starts.
4. ) If you see that Tandberg Endpoint is not able to send presentation , then open a bug with Cisco otherwise Open up a Bug with Sony.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...