I have a customer who is upgrading both their VC and UC environments and the plan is to move the Cisco VC codecs which are presently registered to VCS back to CUCM for a single call control platform. VCS C&E will remain for B2B video calling.
However there will be a requirement for additional TelePresence Room licenses for UCM 10.5.
Is there a program to migrate the CODECs to CUCM for customers with valid UCSS and ESW (and maintenance on the VCS C&E) without having to pay for new TelePresence Room licenses?
I have same request for one of our customers. We need to migrate few Video endpoints from VCS to CUCM. Can you please advise how did you proceed and what kind of licenses are required on the CUCM. Most of video endpoints are Profile P42/55/65. Thanks
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...