I think you are not going to find a set of pictures in the current documentation. However, I think that you can take some pictures from the TC Console software. This software is used to create custom layouts for C series endpoints, in that software, there are many pictures describing each type of local layouts available in C series endpoints, Equal, Prominent, Overlay and Single, you also can see the layout appearance when you are or not sharing/receiving presentation.
Although this software is for C40, C60 and C90. The default layout families are almost the same for another TC endpoints, such as SX, EX and MX series, so you can use the same pictures.
Does it help you? See:
The above layout represents the local layout of a C90 codec with two monitors (one for main video and another for presentation) in a multipoint conference hosted by itself with two remote participants, using the layout type "Overlay".
If you don't have Cisco TC Console software, you can download it from here:
The guys above beat me while I was taking the screen shots.
The best I could do, similar to Jens, was to grab a screen grab of the user interface on one of the codecs. Jens' was from a C40, I grabbed this one from an SX20... they're pretty much the same. This is also shown in the SX20 Quick Set TC6.2 Administrator Guide (page 18).
But, as noted by Paulo, if you use the TC-Console on the C60/C90, you can also customise the layouts for each device, so if you need something different, you can create it.
Wayne -- Please remember to rate responses and to mark your question as answered if appropriate.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...