I have found a serious bug in MCU 4205 sw 4.3(1.68)
So if I create a conference via TMS and add Polycom VSX 7000 (Release_ru 220.127.116.11) with Visual Concert connected and Tandberg MXP770(F9.0.1 PAL),then Codian freezes with high CPU utilization. In this period web interface is unavailable and sometimes Codian reboots.
I have found two way to avoid this bug:
1.Mannauly add those endpoints to a conference and set in advanced interoperability parameters->content negotiation to slave,
2.Disconnect from Polycom Visual Concert station.
How to fix that?
I did a test using TMS, a Polycom VSX 7000 18.104.22.168 and a MXP 770 F9.0.1 and a Codian MSE 8510 MCU to see if the issues is present on other MCU’s running 4.3(1.68)
I had no issues on my side.
Does the Codian freeze as TMS connects the call or when you try send presentation from the Polycom?
It freezes when TMS start call.
Do you have Polycom Visual Concert connected to VSX7000?
When you made conference via TMS did you add Codian to conference manualy? usually TMS add Codians if there is more than 2 participants.
I was also reading through the release notes of 4.3(168) and under the interoperability table they tested with a Polycom VSX7000e 22.214.171.124 and found no issues, don’t know if the test included TMS and Visual concert though.
Also Codian freezes if add to one conference following endpoints:
Tandberg C20 TC126.96.36.1995253
Polycom VSX7000 Release_ru 188.8.131.52
Tandberg C20 TCNC184.108.40.206265
Polycom V500 Release 8.0.3
Polycom VSX7000 Release_ru 220.127.116.11
Polycom ViewStation EX Release 6.0.3