Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

MCU 4501 H323 Gatekeeper Problem!

Hello  cisco world Ii'm new and i hope that with your help i will soon be able to work with the VCS and the MCU

The problem is

I cannot register the h323 to the VCS

h323 gatekeeper : Enabled

h323 gatekeeper address : the address of the vcs

gatekeeper reg type : mcu standard

mandatory h323 id to register : mcuatprobadotbg

password :empty

and the other fields are empty

in the SIP page everything is OK and it is with status Registered but on the h323 page the results are :

h323 gatekeeper status name resolved to the ip of the vcs

Registered address  not registered

Alternate gatekeeper available  0

Thanks !

2 ACCEPTED SOLUTIONS

Accepted Solutions

MCU 4501 H323 Gatekeeper Problem!

Hello Svetoslav

What do you see in VCS log ?

Status>Logs>Event log

br Oleksandr

br Oleksandr

MCU 4501 H323 Gatekeeper Problem!

Ok.

First, you need setup properly NTP on VCS and MCU

br Oleksandr

br Oleksandr
5 REPLIES

MCU 4501 H323 Gatekeeper Problem!

Hello Svetoslav

What do you see in VCS log ?

Status>Logs>Event log

br Oleksandr

br Oleksandr

MCU 4501 H323 Gatekeeper Problem!

Zdrastvuvai Hello my friend

this is what i get

2013-08-06T17:24:13+03:00tvcs: Event="Registration Rejected" Reason="Time difference too large for authentication" Service="H323" Src-ip="192.168.1.221" Src-port="2222" Dst-alias-type="H323" Dst-alias="mcu@proba.bg" Protocol="UDP" Level="1" UTCTime="2013-08-06 14:24:13,194"

MCU 4501 H323 Gatekeeper Problem!

Ok.

First, you need setup properly NTP on VCS and MCU

br Oleksandr

br Oleksandr

MCU 4501 H323 Gatekeeper Problem!

Thanks mate tomorrow i will try and write what happened.

MCU 4501 H323 Gatekeeper Problem!

Thanks a lot problem solved! I reconfigured the NTP server and some other stuff and it worked thanks again!

337
Views
0
Helpful
5
Replies