MCU Rendezvous conferencing using Unified CM

[adamgibs7]

Dears,

In which scenario we shld Deploying an MCU as a trunk for Rendezvous conferencing using Unified CM.

Thanks

[Martin Koch]

If its a new deployment of a MCU I would look into a TelePresence server.

check out:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab09/clb09/confernc.html#pgfId-1110437

Please contact your Cisco partner to help you with it. They will know your deployment and can give you more information.

[adamgibs7]

Dear martin,

I don't have telepresence server.

But i have read deployment guide 4.4 where it shows that to create a trunk to MCU and route pattern i.e for rendevous conferncing ??

this means is a route pattern of 5XXX is created pointing to MCU then a groups of users  who dials a 5555 will be in one conference using a MCU resources

Please correct me if i am wrong

Thanks

[adamgibs7]

Dear Experts,

Can anybody confirm to my query above  or else can anybody correct me if i am wrong

thanks

[heathrw · Accepted solution]

If you are using this guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/mcu_deployment_guide_4-4.pdf

Then yes that is correct. 

You would need to create the permanent conferences first or use an auto attendant

[adamgibs7]

 Dear heathrw

Thanks for confirming my query,

As I am planning to register MCU  as media resource and also a rendezvous point, so I hope these both can work.

Thanks