Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
4268
Views
0
Helpful
4
Replies

MIBS for TANDBERG MXP and C-SERIES codecs

Steve Deslandes
Level 1
Level 1

‎08-13-2012 07:15 AM - last edited on ‎03-25-2019 09:04 PM by Community Manager

Hello,

     Can somebody provide me the list of MIBS for the Tandberg MXP and the C-Series codecs?

Thanks

1 person had this problem
Labels:
0 Helpful
4 Replies 4

Justin Ferello
Level 5
Level 5

‎08-13-2012 11:50 AM

Steve,

As far as I know there are no MIB files for the TelePresence products, they just use standard SNMP definitions.

Thanks,

Justin

Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ
0 Helpful

Patrick Pettit
Cisco Employee
Cisco Employee

‎08-14-2012 04:44 AM

HI Steve.  This is the MXP MIB From F4 and up.  (Long Cut and Paste)

TANDBERG-MIB DEFINITIONS ::= BEGIN
IMPORTS
        enterprises, TimeTicks
        FROM RFC1155-SMI
        OBJECT-TYPE
        FROM RFC-1212
        DisplayString
        FROM RFC1213-MIB
        TRAP-TYPE
        FROM RFC-1215;
 
tandberg       OBJECT IDENTIFIER ::= { enterprises 5596 }
videoconf      OBJECT IDENTIFIER ::= { tandberg 10 }
status         OBJECT IDENTIFIER ::= { videoconf 3 }
callstatus     OBJECT IDENTIFIER ::= { status 2 }
logging        OBJECT IDENTIFIER ::= { videoconf 4 }
services        OBJECT IDENTIFIER ::= { videoconf 5 }
system         OBJECT IDENTIFIER ::= { videoconf 6 }
fun            OBJECT IDENTIFIER ::= { videoconf 7 }
h323           OBJECT IDENTIFIER ::= { videoconf 8 }
codec          OBJECT IDENTIFIER ::= { system 4 }
security       OBJECT IDENTIFIER ::= { system 5 }
events         OBJECT IDENTIFIER ::= { system 6 }
experimental   OBJECT IDENTIFIER ::= { videoconf 8 }
 
-- Common parameters
 
callMode OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Call Mode = Idle, Telephone, Videophone, DuoVideo, MultiSite, ... "
    ::= { callstatus 1 }
 
callLastError OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Descriptive error message, set after a Enterprise Error Trap has been sent"
    ::= { callstatus 2 }
 
callLastErrorTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "System time (since boot) when last error message was set"
    ::= { callstatus 3 }
 
callLastCauseCode OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The cause value"
    ::= { callstatus 4 }
 
callLastCauseCodeLoc OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The cause location"
    ::= { callstatus 5 }
 
statusStreaming OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if streaming is enabled or not. Idle or Streaming"
    ::= { services 2 }
 
statusVNC OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates VNC status; idle, active, connectionfailure, toomanyattempts, authfailure, resfailure"
    ::= { services 3 }
 
telnet OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 4 }
 
ftp OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 5 }
 
http OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 6 }
 
h323 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 7 }
 
remoteparameter OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 8 }
 
remotesoftware OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 9 }
 
snmp OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable/read-only"
    ::= { services 10 }
 
telnetchallenge OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "enable/disable"
    ::= { services 11 }
 
telnetchallengeport OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "port number. 23 or 57"
    ::= { services 12 }
 
-- call information
 
callNumber OBJECT-TYPE
    SYNTAX INTEGER (0..1024)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of channels available for this unit"
    ::= { status 3 }
 
callTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CallEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Channel information table"
    ::= { status 4 }
 
callEntry OBJECT-TYPE
    SYNTAX CallEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about each channels status, activity and usage"
    INDEX { callID } 
    ::= { callTable 1 } 
 
CallEntry ::=
    SEQUENCE {
    callID
    INTEGER,
    callTag
    DisplayString,
    callRemoteSite
    DisplayString,
    callDirection
    DisplayString,
    callStatus
    DisplayString,
    callChannel
    DisplayString,
    callType
    DisplayString,
    callCause
    DisplayString,
    callDuration
    TimeTicks,
    callIncomingRestrict
    DisplayString,
    callOutgoingRestrict
    DisplayString,
    callAccNo
    DisplayString,
    callEncryption
    DisplayString,
    callSysUpTime
    TimeTicks,
    callChannelCurrent    
    DisplayString,
    callH323PacketLossVal    
    INTEGER,
    callH323PacketLossTot    
    INTEGER,
    callH323PacketLossReportTime 
    INTEGER,
    callH323PacketLossTotalPackets
    INTEGER,
    callH323PacketLossLostPackets
    INTEGER
    }   
 
callID OBJECT-TYPE
    SYNTAX INTEGER (0..1024)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Channel number"
    ::= { callEntry 1 }
 
callTag OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Unique call identifier since reboot"
    ::= { callEntry 2 }
 
callRemoteSite OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Telephone number or other address of remote connection"
    ::= { callEntry 3 }
 
callDirection OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle, incoming, outgoing"
    ::= { callEntry 4 }
 
callStatus OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,syncing,capex,unframed,speech,disconn,synced"
    ::= { callEntry 5 }
 
callChannel OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,speech,h221-,bonding-,h323,unknown"
    ::= { callEntry 6 }
 
callType OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,answering,calling,connected,disconnecting,disconnected"
    ::= { callEntry 7 }
 
callCause OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Cause code for failures"
    ::= { callEntry 8 }
 
callDuration OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Duration of this connection"
    ::= { callEntry 9 }
 
callIncomingRestrict OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "restrict,norestrict"
    ::= { callEntry 10 }
 
callOutgoingRestrict OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "restrict,norestrict"
    ::= { callEntry 11 }
 
callAccNo OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The access code entered for the call "
    ::= { callEntry 12 }
 
callEncryption OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "encryption status"
    ::= { callEntry 13 }
 
callSysUpTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "system up time since reboot"
    ::= { callEntry 14 }
 
callChannelCurrent OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,speech,h221-,bonding-,h323,unknown"
    ::= { callEntry 15 }
 
callH323PacketLossVal OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "packet loss value the last 2 seconds H323"
    ::= { callEntry 16 }
 
callH323PacketLossTot OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "total packet loss value since last downspeed H323"
    ::= { callEntry 17 }
 
callH323PacketLossReportTime OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Report time in seconds"
    ::= { callEntry 18 }
 
callH323PacketLossTotalPackets OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets sendt during last report time"
    ::= { callEntry 19 }
 
callH323PacketLossLostPackets OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of packets lost during last report time"
    ::= { callEntry 20 }
 
-- start of inncoming entries
 
incomingNumber OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of entries in incomingTable"
    ::= { status 8 }
 
incomingTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IncomingEntry 
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION 
        "Table with information about incoming connections"
    ::= { status 9 }
 
incomingEntry OBJECT-TYPE
    SYNTAX IncomingEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about each channels status, activity and usage"
    INDEX { callIncomingId } 
    ::= { incomingTable 1 } 
 
IncomingEntry ::= 
    SEQUENCE {
    callIncomingId
    INTEGER,
    callIncomingAudio
    DisplayString,
    callIncomingVideoMode
    DisplayString,
    callIncomingVideoResolution
    DisplayString,
    callIncomingDuoResolution
    DisplayString    
    }
 
 
callIncomingId OBJECT-TYPE
    SYNTAX INTEGER ( 0..1024 )
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifier for each incoming table entry."
    ::= { incomingEntry 1 }
 
callIncomingAudio OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Incoming audio compression method"
    ::= { incomingEntry 2 }
 
callIncomingVideoMode OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Incoming video compression method"
    ::= { incomingEntry 3 }
 
callIncomingVideoResolution OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Incoming resolution for video"
    ::= { incomingEntry 4 }
 
callIncomingDuoResolution OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Incoming resolution for duovideo"
    ::= { incomingEntry 5 }
 
-- end of incoming table
 
-- start of outgoing entries
 
outgoingNumber OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of entries in outgoingTable"
    ::= { status 10 }
 
 
outgoingTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OutgoingEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION 
        "Table with information about outgoing connection"
    ::= { status 11 }
 
 
outgoingEntry OBJECT-TYPE
    SYNTAX OutgoingEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "entry in outgoing information table"
    INDEX { callOutgoingId }
    ::= { outgoingTable 1 }
 
OutgoingEntry ::=
    SEQUENCE {
    callOutgoingId
    INTEGER,
    callOutgoingAudio
    DisplayString,
    callOutgoingVideoMode
    DisplayString,
    callOutgoingVideoResolution
    DisplayString,
    callOutgoingDuoResolution
    DisplayString
    }
 
callOutgoingId OBJECT-TYPE
    SYNTAX INTEGER ( 0..1024 )
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifier for each outgoing table entry"
    ::= { outgoingEntry 1 }
 
callOutgoingAudio OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Outgoing audio compression method"
    ::= { outgoingEntry 2 }
 
 
callOutgoingVideoMode OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Outgoing video compression method"
    ::= { outgoingEntry 3 }
 
callOutgoingVideoResolution OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Outgoing resolution for video; qcif,cif,icif,..."
    ::= { outgoingEntry 4 }
 
callOutgoingDuoResolution OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Outgoing resolution for duovideo when enabled, qcif,cif,icif,..."
    ::= { outgoingEntry 5 }
 
-- end of outgoing entries
 
-- Codec descriptors definition
 
    unitDesc OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Type of Codec, version"
        ::= { codec 1 }
 
    versionId OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Codec software configuration identifier for major releases"
        ::= { codec 2 }
 
    softwareType OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Software type descriptor (same as data port AT-command ati3)"
        ::= { codec 3 }
 
    hardwareConfig OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Codec hardware configuration (same as data port AT-command ati6) "
        ::= { codec 5 }
 
    softwareConfig OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Codec software configuration (same as data port AT-command ati7) "
        ::= { codec 6 }
 
    localISDN OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "ISDN telephone number for this codec"
        ::= { codec 8 }
 
    dispbox OBJECT-TYPE
      SYNTAX INTEGER (0..1024)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
            "User response from displaybox"
      ::= { codec 9 }
 
    protect OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "protect on/off on the dataport"
        ::= { codec 10 }
 
    ippass OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "password on/off on the dataport"
        ::= { codec 11 }
 
    h323alias OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "displays the h323alias of the codec"
        ::= { codec 12 }
 
-- security descriptors definition
 
    authService OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "ftp, telnet or http "
        ::= { security 1 }
 
    authStatus OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "true or false "
        ::= { security 2 }
 
    authAddr OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only     
        STATUS mandatory
        DESCRIPTION 
           "Remote IP address"       
       ::= { security 3 }
 
    authTime OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
             "Time in ticks since last reboot"  
        ::= { security 4 }
 
-- events descriptors definition
 
    eventService OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "ftp"
        ::= { events 1 }
 
    eventAddr OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only     
        STATUS mandatory
        DESCRIPTION 
            "Remote IP address" 
        ::= { events 2 }
 
    eventTime OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Time in ticks since last reboot"
        ::= { events 3 }
 
    eventDesc OBJECT-TYPE  
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Event descriptor"
        ::= { events 4 }
 
-- h323 descriptors definition
    gkaddres OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "gatekeeper address"
        ::= { h323 1 }
 
-- fun
 
    snakeHigh OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Snake high score"
        ::= { fun 1 }
 
    snakeName OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION 
            "Snake high score name"
        ::= { fun 2 }
 
-- end of generic definitions
 
-- logging of calls
 
logNumber OBJECT-TYPE
    SYNTAX INTEGER (0..1024)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of log entries in the logTable "
    ::= { logging 4 }
 
logTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LogEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The call log information table"
    ::= { logging 5 }
 
logEntry OBJECT-TYPE
    SYNTAX LogEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A call log entry in the logTable "
    INDEX { logID } 
    ::= { logTable 1 } 
 
LogEntry ::=
    SEQUENCE {
    logID
    INTEGER,
    logTag
    DisplayString,
    logRemoteSite
    DisplayString,
    logDirection
    DisplayString,
    logStatus
    DisplayString,
    logChannel
    DisplayString,
    logType
    DisplayString,
    logCause
    DisplayString,
    logDuration
    TimeTicks,
    logIncomingRestrict
    DisplayString,
    logOutgoingRestrict
    DisplayString,
    logAccNo
    DisplayString,
    logEncryption
    DisplayString,
    logSysUpTime   
    TimeTicks,
    logH323PacketLossTot   
    INTEGER        
    }
 
logID OBJECT-TYPE
    SYNTAX INTEGER (0..1024)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifier for each log table entry"
    ::= { logEntry 1 }
 
logTag OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Unique log identifier since reboot"
    ::= { logEntry 2 }
 
logRemoteSite OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "telephone number, H323-Alias or IP-address of remote connection"
    ::= { logEntry 3 }
 
logDirection OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle, incoming, outgoing"
    ::= { logEntry 4 }
 
logStatus OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,syncing,capex,unframed,speech,disconn,synced"
    ::= { logEntry 5 }
 
logChannel OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle,speech,h221-,bonding-,h323,unknown"
    ::= { logEntry 6 }
 
logType OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "idle/answering/logging/connected/disconnecting/disconnected"
    ::= { logEntry 7 }
 
logCause OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Cause code for failures"
    ::= { logEntry 8 }
 
logDuration OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Duration of this connection"
    ::= { logEntry 9 }
 
logIncomingRestrict OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "restrict, norestrict"
    ::= { logEntry 10 }
 
logOutgoingRestrict OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "restrict, norestrict"
    ::= { logEntry 11 }
 
logAccNo OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The access code/account code used for the connection. 0 if nothing was
used"
    ::= { logEntry 12 }
 
logEncryption OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "encryption status"
    ::= { logEntry 13 }
 
logSysUpTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only 
    STATUS mandatory
    DESCRIPTION
        "system up time since rebbot"
    ::= { logEntry 14 }
 
logH323PacketLossTot OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "total packet loss H323"
    ::= { logEntry 15 }
 
-- TRAP definitions
 
 callModeChange TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {callMode}
        DESCRIPTION
               "Informs of change in Call Mode, whenever a codec goes from Idle to Telephone, Videophone, MCU or similar."
        ::= 1
 
genericError TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "callLastError has been set with a new message, indicating some kind of Codec problem"
        ::= 2
 
 
lowBattery TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "Battery is low in the remote control"
        ::= 3
 
downSpeeding TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "Downspeeding, adjusting connection speed due to problem"
        ::= 4
 
startupgrade TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "A codec software upgrade has begun"
        ::= 5
 
finsishedupgrade TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "A codec software upgrade has been completed"
        ::= 6
 
dispboxtrap TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "When a display box (dispbox) is shown on the codec, and the user
 presses a quick-key, this trap is sent to indivate the quick-key selected.
 Values are 1,2,3"
        ::= 7
 
 connect TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {callID, callRemoteSite, callTag}
        DESCRIPTION
               "The call is connected"
        ::= 8
 
 encryption TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "Encryption status changed to des"
        ::= 9
 
 gatekeeperregfailure TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {gkaddres}
        DESCRIPTION
                "Gatekeeper registration failure"
        ::= 10
 
 gatekeeperregsuccess TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {gkaddres}
        DESCRIPTION
               "Gatekeeper registration successs"
        ::= 11
 
 disconnect TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {callID, callRemoteSite, callTag}
        DESCRIPTION
               "The call is disconnected"
        ::= 12
 
ipauthenticationfailure TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {authService, authAddr, authTime}
        DESCRIPTION
               "A remote access to the codec failed. Access via telnet, ftp or http is logged"
        ::= 13
 
 flowcontrol TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {callID, callH323PacketLossVal, callH323PacketLossTot}
        DESCRIPTION
               "H323 downspeed"
        ::= 16
 
 h323info TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {callID, callH323PacketLossReportTime, callH323PacketLossTotalPackets, callH323PacketLossLostPackets}
        DESCRIPTION
               "H323 information"
        ::= 17
 
 eventreport TRAP-TYPE
        ENTERPRISE tandberg
        VARIABLES {eventService, eventAddr, eventTime, eventDesc}
        DESCRIPTION
               "Report event activity (only ftp for now)"
        ::= 20
 
 snakehighscore TRAP-TYPE
        ENTERPRISE tandberg
        DESCRIPTION
               "snake high score"
        ::= 99
 
END

-----------------------------------------------------------------------

C-Series uses XML Feedback to provide status and only supports these OID's described in RFC1213

1.3.6.1.2.1.1.1

1.3.6.1.2.1.1.2

1.3.6.1.2.1.1.3

1.3.6.1.2.1.1.4

1.3.6.1.2.1.1.5

1.3.6.1.2.1.1.6

1.3.6.1.2.1.1.7

(sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices)

-----------------------------------------------------------------------

SNMP for Cisco MCU's:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/articles/cisco_telepresence_support_snmp_mibs_kb_67.shtml

-----------------------------------------------------------------------

TMS MIB is usually included in the TMS install but the MIB TMS uses to send traps to trap receiver. 

TANDBERG-TMS-MIB DEFINITIONS ::= BEGIN

IMPORTS

MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE, Integer32, enterprises, IpAddress

FROM SNMPv2-SMI

sysUpTime, snmpTrapOID

FROM SNMPv2-MIB

DisplayString, TEXTUAL-CONVENTION, MacAddress

FROM SNMPv2-TC;

tandbergTMSEVENTModule MODULE-IDENTITY

  LAST-UPDATED    "201010131310Z"

  ORGANIZATION    "Tandberg Telecom AS"

  CONTACT-INFO

    "Postal:

      Lysaker,

      NORWAY"

  DESCRIPTION

  "The TANDBERG-TMS MIB specifies a conceptual group of observable

   events and objects.  These events and objects comprise the management information

   necessary to effectively administrate TANDBERGS TMS videoconferencing management suite.

  Copyright 2006-2010 Tandberg Telecom AS.  All rights reserved.  Reproduction of this

  document is authorized on the condition that the foregoing copyright notice is included.

  This SNMP MIB module (Specification) embodies Tandberg Telecom AS's proprietary

  intellectual property. Tandberg Telecom AS retains all title and ownership in the

  Specification, including any revisions.

  Tandberg Telecom AS grants all interested parties a non-exclusive license to use

  and distribute an unmodified copy of this Specification in connection with management

  of Tandberg Telecom AS's products, and without fee, provided this copyright notice

  and license appear on all copies.

  This Specification is supplied 'AS IS,' and Tandberg Telecom AS makes no warranty,

  either express or implied, as to the use, operation, condition, or performance of the

  Specification."

  REVISION        "201010131310Z"

  DESCRIPTION     "Update copyright notice"

  REVISION        "201010081400Z"

  DESCRIPTION     "Add endpoint name and MAC address to traps."

  REVISION        "201001251300Z"

  DESCRIPTION     "Fix copyright notice"

  REVISION        "200910291200Z"

  DESCRIPTION     "Fixed some trap OIDs: 5596.110.6.1.3 added, 5596.110.6.1.8 was incorrectly labeled, and 5596.110.6.1.23 was renumbered from 5596.110.6.1.21"

  REVISION        "200909251200Z"

  DESCRIPTION     "Remove two textual description fields which were unused"

  REVISION        "200909221200Z"

  DESCRIPTION     "Fixed many syntax errors"

  REVISION        "200909181200Z"

  DESCRIPTION     "Mib updated with event 9 and 21"

  REVISION        "200606190000Z"

  DESCRIPTION     "Mib Created"

::= { tms 6 }

tandberg                OBJECT IDENTIFIER ::= { enterprises 5596 }

tms                     OBJECT IDENTIFIER ::= { tandberg 110 }

EventType ::= TEXTUAL-CONVENTION

  STATUS  current

  DESCRIPTION

    "Enumerated type representing an event type from TMS"

  SYNTAX  INTEGER {

    boot(1),

    linkDown(2),

    linkUp(3),

    lowBattery(6),

    lostResponse(7),

    gotResponse(8),

    downspeeding(9),

    authenticationFailure(18),

    flowControl(21),

    ipConflict(22),

    userAssistanceRequested(23),

    rogueSystemFound(118),

    preregisteredSystemActivated(119),

    systemChangedType(120),

    packetLossOccurred(121)

  }

AlertLevel ::= TEXTUAL-CONVENTION

  STATUS  current

  DESCRIPTION

    "Enumerated type representing the alert Level"

  SYNTAX  INTEGER {

    noAlert(0),

    critical(1),

    major(2),

    minor(3),

    warning(4),

    cleared(5)

  }

IsClearingNotification ::= TEXTUAL-CONVENTION

  STATUS  current

  DESCRIPTION

    "Enumerated type representing whether trap is a clearing notification or not"

  SYNTAX  INTEGER {

    no(0),

    yes(1)

  }

tmsMonitoring       OBJECT-IDENTITY

  STATUS          current

  DESCRIPTION     "OID for tandbergTMSEVENTModule monitoring branch"

  ::= { tandbergTMSEVENTModule 1 }

tmsTrapSystemBoot NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that system has just booted"

  ::= { tmsMonitoring 1 }

tmsTrapLinkUpDown NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that system has just has a LinkUp/LinkDown event"

  ::= { tmsMonitoring 3 }

tmsTrapLostOrGotResponse NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that TMS has lost or regained connection with system. tmsIsClearingNotification = 1 if got response 0 if lost"

  ::= { tmsMonitoring 7 }

tmsTrapLowBattery NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that a system is reporting low battery"

  ::= { tmsMonitoring 8 }

tmsTrapDownspeeding NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that system is downspeeding"

  ::= { tmsMonitoring 9 }

tmsTrapAuthenticationFailure NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "A failed attempt to log in on system has occurred"

  ::= { tmsMonitoring 20 }

tmsTrapFlowControl NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that system is experiencing flow control"

  ::= { tmsMonitoring 23 }

tmsTrapIpConflict NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification of an ipconflict on network"

  ::= { tmsMonitoring 24 }

tmsTrapUserAssistanceRequested NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that a user has requested assistance"

  ::= { tmsMonitoring 25 }

tmsTrapRogueSystemFound NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that a rogue system (system not registered in TMS) has been found on the network"

  ::= { tmsMonitoring 28 }

tmsTrapPreregisteredSystemActivated NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that a preregistered system in TMS has been activated"

  ::= { tmsMonitoring 29 }

tmsTrapSystemChangedType NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that a system registered in TMS has changed system type"

  ::= { tmsMonitoring 30 }

tmsTrapPacketLossOccurred NOTIFICATION-TYPE

  OBJECTS { sysUpTime, snmpTrapOID, tmsAlertLevel, tmsEventTypeId, tmsSystemId, tmsSystemIpadress, tmsIsClearingNotification, tmsSystemMacAddress, tmsSystemName}

  STATUS  current

  DESCRIPTION

    "Notification that system is experiencing problems in a conference and is dropping packets"

  ::= { tmsMonitoring 31 }

tmsBindingPrefix OBJECT IDENTIFIER

  ::= { tms 1 }

tmsEventTypeId   OBJECT-TYPE

  SYNTAX      EventType

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "The type of event that was thrown"

  ::= { tmsBindingPrefix 1 }

tmsSystemId   OBJECT-TYPE

  SYNTAX      Integer32

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "System id"

  ::= { tmsBindingPrefix 3 }

tmsAlertLevel   OBJECT-TYPE

  SYNTAX      AlertLevel

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "The alert Level of the event that was thrown"

  ::= { tmsBindingPrefix 4 }

tmsSystemIpadress   OBJECT-TYPE

  SYNTAX      IpAddress

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "System ip address"

  ::= { tmsBindingPrefix 6 }

tmsIsClearingNotification   OBJECT-TYPE

  SYNTAX      IsClearingNotification

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "0 = new alert, 1 = clear old alert"

  ::= { tmsBindingPrefix 7 }

tmsSystemMacAddress   OBJECT-TYPE

  SYNTAX      MacAddress

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "System MAC address in canonical order as defined by IEEE 802.1a (least significant bit first)"

  ::= { tmsBindingPrefix 8 }

tmsSystemName   OBJECT-TYPE

  SYNTAX      DisplayString

  MAX-ACCESS  read-only

  STATUS      current

  DESCRIPTION "Name of system in TMS"

  ::= { tmsBindingPrefix 9 }

END    

-----------------------------------------------------

Hope this helps. 

VR

Patrick

0 Helpful

Mahmoud Simrin
Level 1
Level 1
In response to Patrick Pettit

‎09-21-2012 10:33 AM

Hello Patrick,

Do you have a list of the thresholds/metrics of the alerts generated by the TMS ?

Thank you

0 Helpful

Patrick Pettit
Cisco Employee
Cisco Employee
In response to Mahmoud Simrin

‎09-24-2012 06:09 AM

Hi Mahmoud - I do believe if the system traps it to TMS, TMS will then forward that information to the trap server specified under network settings page.  Does that answer your question? 

VR

Patrick

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents