Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mobile and Remote Access using Cisco VCS Expressway-C and Expressway-E

Hi I have installed the Cisco VCS Expressway - E and Expressway -C.

I´m having issues in the TLS communication between the Cisco Callmanager and the VCS Control.

Also, between the VCS Control and the VCS Expressway.

 

I think is a problem of certificates.

Is there a video to follow? Because it´s very tricky trying to configure this part of the certificates.

 

Thanks

5 REPLIES

I would recomend to check

I would recomend to check out

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf

 

Most likely the most important part is that the used domains are correct and that its a client server certificate.

 

Not sure if a video would really help here ;-)

 

There is one for the cisco  webex integration, but that might not completely fit here:

http://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/tms/config_guide/webex_enabled_telepresence/config_vcse_certs/vcse_certs_part_1.html

 

 

 

 

Please remember to rate helpful responses and identify

New Member

Thanks for the links Martin!!

Thanks for the links Martin!! I will try to do it! 

New Member

Hi,Is it mandatory to join

Hi,

Is it mandatory to join the CUCM cluster to the Domain,DNS?

Thanks

New Member

Hi!I don´t know if it is

Hi!

I don´t know if it is mandatory! But is better if you have all your devices configured in a domain with the proper DNS.

 

Regards.

New Member

Thanks

Thanks

324
Views
0
Helpful
5
Replies
CreatePlease login to create content