Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Mount 2.5x Camera?

All,

I see the following in the user guide, however I hav several SX20 camera mounts and I see no way of mounting this camera on them.  I will say that my SX20 camera mounts are somewhat older, we go them when the SX20s first started shipping, so unless they have changed with the release of the 2.5x camera....

"The camera can be mounted on a screen with the camera bracket

that is part of the SX20 Quick Set bundle, or it can stand on an

even surface. The image flips automatically."

Thank you,

Justin Ferello
Technical Support Specialist
KBZ, a Cisco Authorized Distributor
http://www.kbz.com
e/v: justin.ferello@kbz.com       

Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Mount 2.5x Camera?

Check out the Installation Sheet (http://www.cisco.com/en/US/docs/telepresence/endpoint/quick-set-sx20/installation_guide/sx20_quick_set_installation_sheet_for_web.pdf).

There are two brackets - one for Option A (12x) and B (4xS2) cameras, and the other one for the Option C (2.5X) camera.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
2 REPLIES
VIP Purple

Re: Mount 2.5x Camera?

Check out the Installation Sheet (http://www.cisco.com/en/US/docs/telepresence/endpoint/quick-set-sx20/installation_guide/sx20_quick_set_installation_sheet_for_web.pdf).

There are two brackets - one for Option A (12x) and B (4xS2) cameras, and the other one for the Option C (2.5X) camera.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Re: Mount 2.5x Camera?

Wayne,

Thanks for the link, I did not think to look in the SX20 install guide, duh!  As I thought, a different mount than the other cameras.  Cisco should be a little more specific in the camera user guide :)

Thanks,

Justin

Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ
362
Views
0
Helpful
2
Replies
CreatePlease to create content