I have a MSE 8510 running 4.4(3.49) that is having trouble connecting codecs with meetings that get scheduled end to end. Instead of encountering busy and then attempting to redail it appears to not redial after the initial attempt. I looked through the logs and found that the timestamps for tearing down the room from the first session overlaps with setting up the room for the next session. The meetings were scheduled from 1:00pm - 2:00pm and 2:00pm - 3:00pm. Has anyone seen this or knows of a solution to it?
40627 13:00:01.483 CONFERENCE Info starting up scheduled conference "Meeting 1"
40637 13:00:01.564 CONFERENCE Info setting up "Meeting 1" preconfigured H.323 endpoint "Conference room 1" (1/80)
40638 13:00:01.567 CONFERENCE Info new H.323 participant 5591
40730 14:00:00.319 CONFERENCE Info starting up scheduled conference "Bi-Weekly Meeting"
40732 14:00:00.372 CONFERENCE Info setting up "Bi-Weekly Meeting" preconfigured H.323 endpoint "Conference room 1" (1/80)
40733 14:00:00.375 CONFERENCE Info new H.323 participant 5611
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...