Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MX200/300 G1 vs G2

Hi,

 

Does anyone have a good comparision between the MX200/300's G1's and G2's?

 

Thanks in advance

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Here is an endpoint-product

Here is an endpoint-product-matrix.pdf that gives an overview of all the TelePresence endpoint products and there features.  Should provide you some good comparison information.  Were you looking for anything specific, or just wondering what the differences were?

2 REPLIES
VIP Purple

Here is an endpoint-product

Here is an endpoint-product-matrix.pdf that gives an overview of all the TelePresence endpoint products and there features.  Should provide you some good comparison information.  Were you looking for anything specific, or just wondering what the differences were?

The document Patrick pointed

The document Patrick pointed you to has all of the details. If you just want a quick summary the major differences (aside from the obvious differences in the appearance) are:

Cameras - the G1's had 4X optical zoom, the G2's have the 2.5/5X (optical and with 2x digital) on the 200 with a much wider field of view, and the 4/8X on the 300. 

Dual screen - G1's had no capability to support a second screen, G2's have the port and it is enabled by default

Multisite - G1's did not offer this as an option, G2's do. 

Resolution/frame rate - G2's can do 1080p/60, G1's can do 60fps up to 720p and 30 at 1080p. Also note the premium resolution was an option on G1's it's standard now. 

Touch screen - G1 is the Touch 8, G2 is the Touch 10. 

Intelligent Proximity support - experimental mode only on G1, will be fully supported on G2

Hope this helps. 

571
Views
0
Helpful
2
Replies
CreatePlease to create content