Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

MX300 touchpad unpairing from CODEC after standby

I have several MX200 and MX300 endpoints that will somehow lose the touchpad. They have to manually be paired again for the system to be used. Has anyone expeienced this?

Feb 19 14:14:14 ppc appl: 100876.38 H323Call I: h323_call_handler::handleDiscInd(p=6, s=1) Received disconnect indication (Cause: 2:31, h323 cause: 31:0)- RemoteDisconnect Q850

Feb 19 14:14:14 ppc appl: 100876.39 MainEvents I: CallDisconnectIndicated(p=6) remoteURI='h323:1234926300' cause=[disconnected('Normal unspecified') 'RemoteDisconnect']

Feb 19 14:14:14 ppc appl: 100876.40 MainEvents I: CallDisconnected(p=6) remoteURI='h323:1234926300' causeToLocal=[disconnected('Normal unspecified') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Feb 19 14:14:14 ppc appl: 100876.52 H323Call I: h323_call::affirmIncomingDisconnect(p=6): Incoming disconnect affirmed

Feb 19 14:14:14 ppc appl: 100876.52 IXUser I: iXFsmHandler: deleteChannel(client=0x22cbe044)

Feb 19 14:14:14 ppc appl: 100876.52 IXUser W: iXFsmHandler: Could not find client 0x22cbe044 to deleteChannel

Feb 19 14:14:14 ppc appl: 100876.53 MainEvents I: LayoutUpdated(p=1) outputNo=2 og=8

Feb 19 14:14:14 ppc appl: 100876.54 MainEvents I: LayoutUpdated ...frame[1.1] wallpaper p=1 src=0 ig=19 x=0 y=0 w=10000 h=10000 l=1 b=0 clip

Feb 19 14:14:14 ppc appl: 100876.54 MainEvents I: Mic Unmuted

Feb 19 14:14:14 ppc appl: 100876.56 CAMERA I: CamVisca::Ready_doCAMActionReq cameraId=1 actionId=20

Feb 19 14:14:14 ppc appl: 100876.56 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 0

Feb 19 14:14:14 ppc appl: 100876.56 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 32 w 704 h 576

Feb 19 14:14:14 ppc appl: 100876.56 VIDEOCTRL-0 I: (proxy,161) maximum number of framestorage slices 2

Feb 19 14:14:14 arm1 videogw: VPOutput_Start: vpDispStart

Feb 19 14:14:14 arm1 videogw: startVideoPort: Setting max size to 1920x1200

Feb 19 14:14:14 arm1 video1: 100876.82 DEC_FSM-1 I: create png width=1920 height=1200 mbps=0 dec=ttvdec_png

Feb 19 14:23:44 ppc appl: 101446.54 MainEvents I: Standby() secondsToStandby=30

Feb 19 14:24:14 ppc appl: 101476.54 MainEvents I: Standby() secondsToStandby=0

Feb 19 14:24:14 ppc appl: 101476.55 VIDEOLC-0 I: PowerManagement, request power save on

Feb 19 14:24:14 ppc appl: 101476.55 VIDEOLC-0 I: PowerManagement, backlight off

Feb 19 14:24:14 ppc appl: 101476.89 VIDEOLC-0 I: PowerManagement, power save on confirmed, no error

Feb 19 14:24:16 arm2 vpe1: Sensor powerdown

Feb 19 14:24:16 ppc appl: 101479.18 VIDEOLC-0 I: Received SourceFormatEvent from video link 17 (0x0@0, digital, ok) in ready state

Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 14:14:14 ppc appl: 100876.38 H323Call I: h323_call_handler::handleDiscInd(p=6, s=1) Received disconnect indication (Cause: 2:31, h323 cause: 31:0)- RemoteDisconnect Q850

Feb 19 14:14:14 ppc appl: 100876.39 MainEvents I: CallDisconnectIndicated(p=6) remoteURI='h323:1234926300' cause=[disconnected('Normal unspecified') 'RemoteDisconnect']

Feb 19 14:14:14 ppc appl: 100876.40 MainEvents I: CallDisconnected(p=6) remoteURI='h323:1234926300' causeToLocal=[disconnected('Normal unspecified') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Feb 19 14:14:14 ppc appl: 100876.52 H323Call I: h323_call::affirmIncomingDisconnect(p=6): Incoming disconnect affirmed

Feb 19 14:14:14 ppc appl: 100876.52 IXUser I: iXFsmHandler: deleteChannel(client=0x22cbe044)

Feb 19 14:14:14 ppc appl: 100876.52 IXUser W: iXFsmHandler: Could not find client 0x22cbe044 to deleteChannel

Feb 19 14:14:14 ppc appl: 100876.53 MainEvents I: LayoutUpdated(p=1) outputNo=2 og=8

Feb 19 14:14:14 ppc appl: 100876.54 MainEvents I: LayoutUpdated ...frame[1.1] wallpaper p=1 src=0 ig=19 x=0 y=0 w=10000 h=10000 l=1 b=0 clip

Feb 19 14:14:14 ppc appl: 100876.54 MainEvents I: Mic Unmuted

Feb 19 14:14:14 ppc appl: 100876.56 CAMERA I: CamVisca::Ready_doCAMActionReq cameraId=1 actionId=20

Feb 19 14:14:14 ppc appl: 100876.56 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 0

Feb 19 14:14:14 ppc appl: 100876.56 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 32 w 704 h 576

Feb 19 14:14:14 ppc appl: 100876.56 VIDEOCTRL-0 I: (proxy,161) maximum number of framestorage slices 2

Feb 19 14:14:14 arm1 videogw: VPOutput_Start: vpDispStart

Feb 19 14:14:14 arm1 videogw: startVideoPort: Setting max size to 1920x1200

Feb 19 14:14:14 arm1 video1: 100876.82 DEC_FSM-1 I: create png width=1920 height=1200 mbps=0 dec=ttvdec_png

Feb 19 14:23:44 ppc appl: 101446.54 MainEvents I: Standby() secondsToStandby=30

Feb 19 14:24:14 ppc appl: 101476.54 MainEvents I: Standby() secondsToStandby=0

Feb 19 14:24:14 ppc appl: 101476.55 VIDEOLC-0 I: PowerManagement, request power save on

Feb 19 14:24:14 ppc appl: 101476.55 VIDEOLC-0 I: PowerManagement, backlight off

Feb 19 14:24:14 ppc appl: 101476.89 VIDEOLC-0 I: PowerManagement, power save on confirmed, no error

Feb 19 14:24:16 arm2 vpe1: Sensor powerdown

Feb 19 14:24:16 ppc appl: 101479.18 VIDEOLC-0 I: Received SourceFormatEvent from video link 17 (0x0@0, digital, ok) in ready state
Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16
Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16
Feb 19 15:31:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 15:54:37 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 15:55:31 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/V4[1]/Address: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/Gateway: 65/16

Feb 19 19:18:04 ppc main: ERROR-ttpar: /Platform[1]/Configuration[1]/IP[1]/SubnetMask: 65/16

1 REPLY
VIP Green

MX300 touchpad unpairing from CODEC after standby

What software version are you running on your device? 

I've seen some issues with network connectivity with some of the TC6 releases.  These have been fixed in TC7.0.2.


Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
205
Views
0
Helpful
1
Replies
CreatePlease to create content