In MCU Codian is not possible create group of endpoints. You can make a list of endpoints, but not a group of it.
But I think that is not problem, because when you create a list of endpoints in the MCU, you can enter in the conference, you go to "Add participants" option, there you will be able to select all the endpoints you want to add and then call them all just one time. You don't need call one per time.
I do that, it's fast. The lack of group is not a problem for me.
If you got TMS server, it becomes more easy to do that task.
Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...