Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Profile 42c20 to Profile 42c20

I just wanted to verify that it's possible to do a point to point call between two profile 42c20 units without a VCS or CUCM. They are connected via a WAN so it's just IP to IP correct?

Also, the SX20 quick set that is capable of multiway can do a multipoint call with 3 additional units without an MCU.Is that a correct statement ?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Profile 42c20 to Profile 42c20

Yes that is correct.

Remember that the default configuration supplied with a Cisco C20 or SX20 will require a Gatekeeper. So you need to turn that off first. Otherwise your call attempts will fail.

//Robert

2 REPLIES
New Member

Profile 42c20 to Profile 42c20

Yes that is correct.

Remember that the default configuration supplied with a Cisco C20 or SX20 will require a Gatekeeper. So you need to turn that off first. Otherwise your call attempts will fail.

//Robert

New Member

Profile 42c20 to Profile 42c20

Thank you!

215
Views
0
Helpful
2
Replies
CreatePlease to create content