If I have 3 VCS Controls with traversal zones to a single VCS Expressway, all in the same SIP domain, does this break anything? Assuming no endpoints on any VCS use the same alias.
If 2 or more of the Controls are setup with Device Provisioning, can I setup each Control/TMS instance (1 per control) with it's own provisioning phonebook? (firstname.lastname@example.org, email@example.com) Will it keep the contact lists separate?
Each TMS/Control instance are kept administratively separate for different departments; they share the Expressway to minimize costs.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...