Hey guys, I have an old E20 here I am testing provisioning over the internet on. I have sip registration on, a user created in TMS, and I am asked for login infor when I try to make a call. but I am getting an Error 403 Prohibited when I try to sign on. Is this A firewall issue? Can someone tell me what I am doing wrong? Are my rules wrong in the VCS-E? Thanks for any/all help
I presume you have VCS-Control internally, provisioned with TMS?
Dependent on what software revision your running on your VCS, i would check the your authentication policy on your subzones, default and traversal zone(s). Maybe set it to 'treat as authenticated', and see if you can register then?
Are you also accepting proxied registrations on your VCS-E traversal zone?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...