04-02-2012 03:51 AM - edited 03-17-2019 10:59 PM
Hi,
Can I know where what is the procedure to register a C60 with VCS-Control and procedure to register EX90 with VCS-E. I have created the user credentials for the EX90 in VCS-E. But i am not able to find where to configure that as EX90. Can you please direct me to some documentation link which breifs about it.
Thanks,
JK
04-02-2012 04:31 AM
Hi JK,
Quite easy, check the EX90 TC5.1 admin guide, this also works for the C60:
You can configure that on the tsh:
check:
"H323 Profile 1 Authentication" and "SIP Profile 1 Authentication" in the linked documentation if you need more info.
xconf SIP Profile 1 Authentication ?
*? xConfiguration SIP Profile [1..1] Authentication [1..1] LoginName: < 0="">>
*? xConfiguration SIP Profile [1..1] Authentication [1..1] Password: < 0="">>
xconf H323 Profile 1 Authentication ?
*? xConfiguration H323 Profile [1..1] Authentication LoginName: < 0="">>
*? xConfiguration H323 Profile [1..1] Authentication Password: < 0="">>
*? xConfiguration H323 Profile [1..1] Authentication Mode:
Regards the VCS, check the admin guide and the authentication guide might also be useful for you
as its also important to understand how the authentication itself on the VCS works:
In general http://tandberg.com/docs is a good starting point regards Cisco TP documentation
Please rate this answer using the stars below the message!
Please remember to rate helpful responses and identify
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide