Registering Jabber to VCS-C Virtual Image LAB installation
Are there any licenses needed to register Jabber to a VCS-C that I have running in a lab environment?
I have not been successful so far as I cannot change the "internal" or "external" configurations on my Jabber client? The VCS-C is the free virtual image install and the jabber client is the free downloadable version from the cisco website. BTW, I can register other SIP endpoints to the VCS-C...
The "free" version of JabberVideo locks it to the Cisco provisioning server, if you want to be able to change the server addresses, then you either need to edit the registry on your computer to "unlock" it, or, uninstall it, then download and install the "enterprise" version from Cisco;
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...