Re: SIP Trunk VCS to CallManager and Calling Party Name/Number D
I should clarify my question above - the guide states that you need to enable FQDN on the SIP profile for both the trunk and the phone, but as SCCP phones don't have a SIP profile I'm not sure if it's possible vfor them to dial out using a domain name. I've got my trunk and FQDN configured correctly, but my SCCP phones are still dialling out as 1234@ip-address.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...